Includes 2 Residential Torsion Springs
1 Pr Winding Pro Winding Tools
1 Pair Cables
1 Replacement Bushing
10 Poly Quiet Rollers
Includes 2 Residential Torsion Springs
1 Pr Winding Pro Winding Tools
1 Pair Cables
1 Replacement Bushing
10 Poly Quiet Rollers
How measure for replacement springs
PLEASE NOTE, Any variation of your actual spring dimensions will alter counterbalance and affect the overall life of the replacement spring. Here are the instructions on how to measure your existing spring. If you need help, contact customer support at 1-800-829-6002
IMPORTANT
Please Double Check all your measurements
Spring Orientation
The spring shown above is a Right Hand Wound Spring which mounts
to the left side of center(Red) End. A spring mounted on the right side of center is left hand wound(black end)Doors that have two springs
have both right hand and left hand wound.
STEP 1
Measure The Overall Length Of The Spring--UNWOUND.Take all your measurements from the broken spring. Measure the spring only from coil to coil. Do not include
the winding and stationary ends.
STEP 2
Measure the Inside Diameter Of The Spring
It will be one of the following:
|
1 3/4"
|
2" |
2 1/4" |
Look for a number imprinted on the winding end(shown above).
Measure the length of 10 coils.
Refer to Wire Chart. Example: 10 coils measures 2 1/4" = .225 wire
size.
Also Measure the length of 20 Coils
20 Coils measures 4 1/2"=.225 wire size.
|
Wire Chart
|
|
|
Length of 10 Coils
|
Wire Size
|
|
1 15/16"
|
.192
|
|
2 1/16"
|
.207
|
|
2 3/16"
|
.218
|
|
2 1/4"
|
.225
|
|
2 5/16"
|
.234
|
|
2 7/16"
|
.243
|
|
2 1/2"
|
.250
|
|
2 5/8"
|
.262
|
|
|
Over .262 Wire, Call for Price.
|
|
Wire Chart
|
|
|
Length of 20 Coils
|
Wire Size
|
|
3 7/8"
|
.192
|
|
4 1/8"
|
.207
|
|
4 3/8"
|
.218
|
|
4 1/2"
|
.225
|
|
4 5/8"
|
.234
|
|
4 7/8"
|
.243
|
|
5"
|
.250
|
|
5 1/4"
|
.262
|
|
|
|
|
|
Over .262 Wire, Call For Price.
|
STEP 4
Determine Spring Wind.
Standing inside the garage, looking at the spring(s)
If the spring is mounted Left side of center, the spring is Right Hand Wound.
If the spring is mounted on the right side of center the Spring is Left Hand Wound.
Look at the end of your spring and refer to example below.
|
|
|
Left Hand Wind
|
Right Hand Wind
|
Avoid Having to Repeat The Replacement Process
If your door cycles (opens & Closes) more than
3 times a day, we recommend our High Cycle Option.
An inexpensive upgrade that will double the spring cycle life from 10,000 up to 20,000 cycles.
What is a High Cycle Spring?
A high cycle spring is a re-engineered spring base on your existing spring measurements(See Steps 1 thru 4) creating a DIMENSIONALLY larger spring. A High Cycle spring has the same IPPT(Inch Pounds Per Turn) or torque as the existing spring but has 50% less stress when fully wound, lasting 2X longer. The installation and the number of turns are the same as the existing spring.
(Do not use screwdrivers, socket
extensions,Re-Bar or anything else other than correct winding tools)
Related Items
Complete Bearing Kit/Torsion Shaft Overhaul
2 End Bearing Plates One Center Bearing Plate
(Pressed Steel Bearings)
Only $28.95
For Assistance Call 1-800-829-6002
